RipMap shop guides
How to make a woodworking cut list
A useful cut list tells you what each part is, how many to make, and which stock to pull. Start with one cabinet at a time, then group the parts that can actually be cut from the same material.
Write one row for each distinct part
Give each row a part name, quantity, material, thickness, width and length. Add a cabinet or subassembly name if the project has multiple boxes. Two matching sides can share one row with a quantity of two. Two shelves with different depths need separate rows, even if both are called “shelf.”
Example: a small cabinet case
These example dimensions illustrate how to organize the list. They are not a cabinet plan; use the dimensions from your own drawings and joinery.
- Case sides: 2 pieces, 3/4-inch birch plywood, 23 1/4 × 34 1/2 inches.
- Case bottom: 1 piece, 3/4-inch birch plywood, 23 1/4 × 28 1/2 inches.
- Back: 1 piece, 1/4-inch birch plywood, 29 1/4 × 33 3/4 inches.
The sides and bottom can be planned together. The back belongs on its own stock list because the thickness differs. Keep drawer boxes, face frames and trim identifiable so a stack of cut pieces still makes sense at assembly.
Check the list before you lay out stock
- Use one dimension order and one unit system throughout. If grain matters, note its direction rather than trusting that a rotated rectangle is equivalent.
- Distinguish a finished dimension from the cut size. If edge banding affects your finished size, account for it once, not in both the source sheet and the layout settings.
- Check quantities against the drawing. A pair of cabinets can silently double some parts while leaving shared trim or panels unchanged.
In RipMap you can type parts, paste spreadsheet rows, or import a CSV and check the column mapping in a preview. Once the list matches your drawing, turn it into a plywood cut layout.